ECToyotas.com

[Eltoyotero1]

is that a 79 front bumper you have on da yellow .8
_________________

[frenzy]

Its from a 76 in a j-yard that had 62k miles Got the front and back.

Here it is now. On second pair of turbos, just need a 44-50mm WG, walbro in-tank+external+surge tank, new flywheel friction ring, stronger pressure plate and safc2/mines/blitz ecu and I'll have a single turbo kit ready to install

http://img109.imageshack.us/img109/4718/bigic.jpg

It looks way goofy, I know...I need a stock front bumper to butcher up, then a FOHA lip to make it what I want it to be. That IC just fit perfect and just as wide as that little one. I sold the little one and now i have to sport it lol

[frenzy]

Much worse than I thought. The turbos, both, are beyond fixable. They're garbage now.



Would you look at all that room? What to put there....hmm


That other IC was just simply tooooo big!! So I picked one up from a friend. Its wider, but not as uselessly tall..

Time to start hiding my shit, yo...



Heres another shot of the goods!

[cmorganae86]

this car is great as always, wish you were closer so i could check it out. im not too great with turbos and cant tell what were looking at from the pic, but it appears theres oil in those pics and im guessing it shouldnt be. now your running a single, so what do you think its going to do in terms of power?
_________________
...my 20v ae86...

[Blazinrola80]

let me kno i got the hx40 on the shelf... push out 60lbs per min... allday

[frenzy]

Wish I went hx40 or at least a holset in general. The guy I bought this turbo from had some good words to get $400 from me. Next day I found the same turbo with less miles for $275 from a honda kid. Slapping myself around for that one.

blazin, how much would you want for it anyways? I might have a turbo t-bucket project coming up

cmorgan, theres supposed to be a finned wheel in each of the holes. Bought these from Matt-Panic in seattle and he didnt know they were bad till I installed them, but now I'm not getting any cooperation from him on compensation

[Omar20v]

keep it with the updates of ur project man!


good luck

[frenzy]

Currently dead in the water!! I'm waiting for a guy to get back at me about his tial 44mm vband WG deal I proposed to him. Hes flaking worse than a craigslister.

Just need oil lines/downpipe/installt-program SAFC2 and OFF i go!!

[Dougbmx1990]

isn't that beast on youtube pulling down a town road haha.

[frenzy]

by dlygrind, yup lol not many yellow 1j rollas out there.






Runs and idles, things are working swell.

Last on the list is downpipe mating to exhaust, build vband dump pipe to exhaust, install wideband and safc, clean up the icky poo carbon build up and start pwning sport bikes!

[TOMSTWINCAM]

So your dumping your wastegate into your exhaust?
_________________
Peter Diaz

[frenzy]

I am. I'm also recirculating my BOV, as well as hiding the IC for that stealthy grammy car look lol

[frenzy]

So far the bumper is working out great. Just chopped the middle and even tho theres no foam or impact beam, its still holding shape well.
Still have to fumble around with that goofy IC. Its still uneven and it pisses me off lol Also gotta spray it flat black.

http://img541.imageshack.us/img541/6665/dscn3469.jpg

[Omar20v]

keep it up bro!
_________________
www.razine.com

Dr's First Racing Enthusiast Website

[frenzy]

Got downpipe on, SAFC installed, and have 3 wires for my innovate LM-1 wideband to put on. Also broke an axle, so i need to find mx73/ma61 axle. Other than tuning, its good to go whoop some american muscle butt!